Due back in stock by the middle of June due to some unforseen issues that need to be addressed with the new BEC that will now support 2S to 6S.
The RF-150-8 ESC is based off our popular RF-120 and RF-170 ESCs. This ESC is for 1/8th scale buggies and truggies.
ESC is programmable with a Program Box or PC program which also allows you to update the firmware.
Part # RF-150-8 is the ESC alone.
Part # RF-150-8PB is same as above but includes a Program Box for field programming and a USB cable and adapter for use with the PC program.
We haven't had time to do the video on how to setup your RF-150-8 with your radio. Please look at the video below for the RF-170- ESC as the programming sequence is the same as the RF-170. To use the program box watch the video for the RF-170 with the only difference is you connect the RF-150-8 via the permanent receiver wire.
Resistance: 0.00035 ohm
Size: Footprint W43.7mm x L44.8mm x H41mm inlcudes fan.
Weight: 93.5g with fan and no wires
Case: Aluminum case for maximum cooling
BEC: Adjustable 6V/7.4V BEC rated at 8 amps.
Battery: 2S to 6S
Motor Type: Brushless sensored or sensorless
Motor Limit: 4S-3000KV , 5S-2000KV , 6S-1700Kv
Switch: Integrated on/off switch
Operation Mode: Forward/Brake, Forward/Brake/Reveres and Forward/Reverse
Low Voltage Cutoff
ESC Overheat Protection (Temp Cut)
RF-150 1/8th ESC with Program Box
- Product Code: RF-150-8PB
- Availability: Pre-Order