Due back in stock by the first week of November
The RF-170 2S ESC is based off our popular RF-120V2 but is built with lower resistance FETS and has an adjustable 5A BEC. The receiver wire is now harness that connects to the ESC and it comes with a short and long one for clean installation.
ESC is programmable with a Program Box or PC program which also allows you to update the firmware.
This ESC has a Blinky mode that meets ROAR specs.
Part # RF-170-2S is the ESCalone.
Part # RF-170-2SPB is same as above but includes a Program Box for field programming and a USB cable and adapter for use with the PC program.
Resistance: 0.00035 ohm
Size: Footprint W30.5mm x L37.2mm x H19.5mm. Width including solder tabs is 37mm
Weight: 59g with cap but without wires
Case: Aluminum case for maximum cooling
BEC: 6V/ 7.4V @ 5A
Battery: 2-3S LiPo/LiFe or 4-8 cell NiMh/NiCd
Motor Type: 540 brushless sensored
Motor Limit: 3.5T on 2S
Switch: Integrated on/off switch
Operation Mode: Forward/Brake, Forward/Brake/Reveres and Forward/Reverse
Low Voltage Cutoff
ESC Overheat Protection (Temp Cut)
RF-170-2S with Totemic Mod motor
- Product Code: RF-170-2SM
- Availability: Pre-Order