ROAR approved

The RF-170 2S ESC is based off our popular RF-120V2 but is built with lower resistance FETS and has an adjustable 5A BEC.  The receiver wires is now harness that connects to the ESC and it comes with a short and long one for clean installation.  

ESC is programmable with a Program Box or PC program which also allows you to update the firmware.

This ESC has a Blinky mode that meets ROAR specs.

Part # RF-170-2S is the ESC alone.

Part # RF-170-2SPB is same as above but includes a Program Box for field programming and a USB cable and adapter for use with the PC program.  

 

Video on how to connect and setup your radio to the RF-170

Video on how to connect the program box to the RF-170

RF-170 Instructions

RF-170 programming descriptions.  Same as RF-120 series

Stock Only Firmware for RF-170-2S only

Stock Only Firmware for Program Box

Video on how to update program box firmware

Video on how to set stock only firmware options via program box




 

 


 

 

Specifications

Amps:  170A

Resistance:  0.00035 ohm

Size: Footprint W30.5mm x L37.2mm x H19.5mm. Width including solder tabs is 37mm

Weight: 59g with cap but without wires

Case:  Aluminum case for maximum cooling

BEC: 6V/7.4V @ 5A

Battery:  2-3S LiPo/LiFe or 4-8 cell NiMh/NiCd

Motor Type:  540 brushless sensored

Motor Limit:  3.5T on 2S

Switch:  Integrated on/off switch

 

Adjustable Features

Operation Mode:  Forward/Brake, Forward/Brake/Reveres and Forward/Reverse

Low Voltage Cutoff

ESC Overheat Protection (Temp Cut)

Rotation 

Throttle:

Power Level

Drive Frequency

Neutral Deadband

Reverse Speed

Brake:

Initial Brake

Drag Brake

Full Brake

Brake Frequency

Boost:

Boost Timing

Boost RPM

Boost ACC

Turbo:

Turbo Timing

Turbo Slope

Turbo Delay

Write a review

Please login or register to review

RF-170-2S

  • Product Code: RF-170-2S
  • Availability: In Stock
  • $169.95 $94.95